Location: Battery plaza -> Power Tool Battery-> PANASONIC Power Tool Battery

Replacement for PANASONIC Power Tool Battery

Remember to buy PANASONIC Power Tool Battery for your PANASONIC Power Tool as well. The replacement PANASONIC Power Tool Battery is specially designed for the original PANASONIC Power Tool Battery. We are a manufacturer which specializing in research, manufacture and sales of the highest quality new PANASONIC Battery with reasonable prices. All PANASONIC Battery on our website are brand new and with one year warranty guarantee, 30 days money back gurantee!

Please select the Power Tool Battery that replace the following part numbers of PANASONIC: ( Press " Ctrl+F " to Find )

Please select the Power Tool Battery that is compatible with the following models of PANASONIC:( Press " Ctrl+F " to Find )

How to extend your PANASONIC Power Tool Battery life?

Here are several steps you can take to insure that you get maximum performance from your PANASONIC Power Tool Battery:

Breaking In New PANASONIC Power Tool Battery - new battery come in a discharged condition and must be fully charged before use. It is recommended that you fully charge and discharge your new PANASONIC Power Tool Battery two to four times to allow it to reach its maximum rated capacity.

Preventing the Memory Effect to PANASONIC Power Tool Battery - Keep your PANASONIC Power Tool Battery healthy by fully charging and then fully discharging it at least once every two to three weeks. Exceptions to the rule are Li-Ion batteries which do not suffer from the Memory Effect.

Keep Your PANASONIC Power Tool Battery Clean - It's a good idea to clean dirty battery contacts with a cotton swab and alcohol. This helps maintain a good connection between the battery and your portable device.

Exercise Your PANASONIC Power Tool Battery - Do not leave your PANASONIC Power Tool Battery dormant for long periods of time. We recommend using the battery at least once every two to three weeks. If a battery has not been used for a long period of time, perform the new battery break in procedure described above.

PANASONIC Power Tool Battery Storage - If you don't plan on using the PANASONIC Power Tool Battery for a month or more, we recommend storing it in a clean, dry, cool place away from heat and metal objects. Ni-Cd, Ni-MH and Li-Ion batteries will self-discharge during storage; remember to break them in before use.

Notice for using Ni-MH and Ni-CD battery!

You can use a newer Ni-MH charger to charge your old Ni-CD PANASONIC drill battery but you should not try to charge Ni-MH batteries with a Ni-CD charger. Here's why: Ni-MH and Ni-CD PANASONIC drill battery are chemically very similar and when both are fully charged the battery voltage will start to drop. The Ni-MH voltage drop is much more subtle and more difficult to detect. Ni-MH chargers usually have an over temperature sensor and shutoff to prevent overcharge as well as a more sensitive voltage drop detector where Ni-CD chargers usually only use the voltage drop to determine when to stop charging. If you charge Ni-MH PANASONIC drill battery in a Ni-CD charger it will probably miss the voltage drop and keep right on charging causing the batteries to overheat. Overcharge and overheating Ni-MH PANASONIC drill battery can damage them internally and reduce battery life.